Dear visitor,
VoIPLine Telecom uses latest technologies in web development. Unfortunately your web browser is not supported and some parts of our web site may not be displayed correctly. Below are links to the latest versions of Google Chrome, Mozilla Firefox and MS Edge browser.

VoIPLine Telecom Support

Porting Geographic Numbers - CAT A vs CAT C

In this article

 

Introduction

 

When moving your geographic numbers from one telco provider to another, you will most likely run into the terminology "CAT A and or "CAT C". These are the two most common porting classifications for geographic numbers and greatly influence the failure or success of number management.

 

mceclip0.png

 

CAT A or C? 

 

When a porting application is submitted, it is sent to the losing carrier who will determine what category of port the number is. The most common type is a Simple Port or CAT A port. In the event the simple port fails, it will most likely become a Complex Port or CAT C port. If you are needing to query what category your port is in, contact your current provider or refer to your most recent bill to see if you have any complex services attached.

 

Simple Port (Category A) 

 

Category A ports are generally simple and quick, used to move basic telephone services such as fixed PSTN phone lines. Category Aporting applications generally take between 2-10 business days once the request has been accepted by the losing provider.

 

Rejections 

 

If the CAT A port progresses with a complex service assigned, it will be rejected under Reason 005 - Unable to Cancel Individual Complex Service - Commsalliance-Reject-Codes-V1-030220.

Prevention

Upon submitting your CAT A (simple port) application, ensure that there are nocomplex servicesassigned to the number. This can be checked either through your current provider or from your most recent invoice. 

 

Complex Port (Category C) 

 

Complex ports are used when a number typically has one or more of the following but not limited to:

 

1.ISDN Services

2.Line Hunt

3.Fax Services

4.Number blocks - Number blocks are classified to be a 'single number', meaning that all numbers associated with that block must be ported

5.ADSL Services

6.Ported from Telstra DOT 

 

Cat C porting applications generally take between 5-28 business days once the request has been accepted by the losing provider. 

 

mceclip2.png

 

What happens when the port is accepted?

 

mceclip4.png

 

Due to the complex nature of CAT C ports, there are additional steps that are required to be completed prior to your cutover date being booked. This is formulated into two stages:

 

PNV (Pre-port Number Validation) stage

 

mceclip0.png

 

This stage involves the provision of a regulatory form to allow the gaining carrier to request service number details from the losing carrier This stage takes approximately 10 business days from submission.  (Typically this is where 99% of the rejections will occur)

 

CNA (Complex Notification Advice) stage

 

mceclip1.png

 

This stage involves the advice contained within a 'Porting Notification Order' being submitted from the Gaining Carrier (C/CSP) to the Losing Carrier (C/CSP) which, provides the initial Porting details for each Telephone Number to be Ported using the Cat-C (Complex) process. The CNA stage takes approximately 6 business days from submission. 

 

If you are still concerned about your upcoming number port, the best advice we can offer is to get in touch with our number management team who can clarify any concerns. 


 

support guy

A quick search will help you find the answers to most questions.
If you are unable to find a solution, please send a request to support@voipline.net.au